Firmware Upgrade

ZEISS Touit (X-Mount)

The firmware upgrade to version 1.03 contains the following improvements:

  • Supports higher camera autofocus speeds
  • Addition of compatibility with the ‘Phase Detection AF’ function

Important information:

  • In some cases, the lens may fail to function correctly when an error occurs in the installation of the firmware upgrade. We strongly advise you to read the instructions carefully to avoid such errors.
  • Take care to ensure that the camera contains a fully-charged battery or is connected to a suitable external power source (AC adapter) before installing the firmware upgrade.
  • Leave the battery in the camera, or keep the camera connected to the external power source. Failure to do this could possibly lead to the loss of lens functions.
  • A previous version of the firmware can no longer be reinstated after installation of the firmware upgrade.

Important note:

Please make sure that your camera has the latest firmware version installed. If this is not the case, it is possible that the camera may not recognise the firmware upgrade for ZEISS Touit lenses . Please visit the camera manufacturer’s website to check whether the firmware version in your camera is up-to-date and find possible upgrades.

Upgrading the firmware:

1.) Please format a memory card in your camera. This will be required for upgrading the firmware. Please note that formatting deletes all data already present on the card, including protected files.

2.) Insert a fully-charged battery into the camera or use an external power source (AC adapter) recommended by the camera manufacturer.

3.) Mount the Touit lens on the X-bayonet mount of the camera.

4.) Please read the licence agreement carefully before you start.

5.) Please download the firmware upgrade for the Touit lens you wish to upgrade. Please note that it is important that you read the licence agreement carefully and accept the terms and conditions.



  XFUP0007.DAT (Firmware for the Touit 2.8/12)
  XFUP0008.DAT (Firmware for the Touit 1.8/32)


6.)
Now copy the file to the previously formatted memory card. Please make sure that you do not change the file names in any way as this would otherwise prevent the recognition of the firmware upgrade by the camera.

7.) Insert the memory card with the firmware upgrade into the card slot of your camera.

8.) Press and hold down the (DISP/BACK) button while turning on the camera.

9.) This screen view appears whether an AC adapter is connected or not. When this screen view appears, press the (OK) button.

10.) Select the menu item (lens) to upgrade the ZEISS Touit lens and press the (OK) button.

11.) Press the (UP) button to select ‘OK’.

12.) Press the (OK) button. Leave the battery in the camera, or keep the camera connected to the external power source. Failure to do this could possibly lead to the loss of lens functions.

13.) Press the (OK) button.

14.) The firmware upgrade has been started. The firmware upgrade installation takes approximately 30 second to complete.



15.) This screen view appears when the firmware upgrade is successfully installed. Turn the camera off.

16.) Reformat the card you used for the firmware upgrade before using it for storing pictures.

17.) Insert a formatted memory card in the card slot of the camera.

18.) Press and hold down the (DISP/BACK) button while turning the camera on.

19.) The current firmware version displayed must now be 1.03.

20.) Turn the camera off after checking the firmware version.

Cause:
No memory card in the camera.
Remedy:
Insert the card containing the firmware upgrade in the card slot of the camera.

Cause:
The camera cannot read the card because it is not formatted.
Remedy:
Format the memory card in the camera, remove it and copy the firmware upgrade to the formatted card.

Cause:
The camera cannot read the memory card.
Remedy:
The memory card or the camera may be defective. Please try another memory card or contact an authorised Fujifilm Service facility if the camera is the problem.

 

Cause:
The memory card in the camera does not contain the firmware upgrade file.
Remedy:
Copy the firmware upgrade to the memory card and reinsert it in the card slot of the camera .

Cause:
The camera cannot read the firmware upgrade file from the memory card.
Remedy:
Repeat the download of the firmware upgrade from the ZEISS website and copy it to the memory card.  Reinsert the memory card with the firmware upgrade in the card slot of the camera.

Cause:
The firmware upgrade on the memory card is older than the firmware in the lens.
Remedy:
The currently installed firmware version is the latest version. No upgrade is required.

Cause:
The firmware upgrade on the memory card does not correspond with the lens attached to the camera.
Remedy:
Download the correct firmware upgrade for the lens attached, copy it to the memory card and insert the card in the card slot of the camera.

Cause:
The external power source (AC adapter) for the camera is not connected.
Remedy:
Connect the external power source to the camera before starting the firmware upgrade.

 

Cause:
The firmware upgrade was unable to be completed.
Remedy:
Turn the camera off and contact ZEISS Customer Support: Contact